Volume.17 No.6 December 2018

• Analysis of Size Effect of Nano Scale Machining Based on Normal Stress and Indentation Theories

  Eun-chae Jeon, Yun-Hee Lee, Tae-Jin Je

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.1-6

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.001

  Open abstract

• Evaluation of Sound Quality for Ergonomic Design of Movable Parts in a Refrigerator

  Seong Yeop Kang, Sae Rom So, Gun Ou Kim, Ji Hoon Kim, Sang Hu Park

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.7-15

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.007

  Open abstract

• Relationship between Mechanical Properties and Porosity of Porous Polymer Sheet Fabricated using Water-soluble Particles

  Sae-Rom So, Suk-Hee Park, Sang-Hu Park

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.16-23

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.016

  Open abstract

• Optimization of the Groove Depth of a Sealing-type Abutment for Implant Using a Genetic Algorithm

  Hyeon-Yeol Lee, Dae-Sun Hong

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.24-30

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.024

  Open abstract

• Development of Integrated Dynamics Control System of SUV Vehicle with Front and Rear Steering System

  Jeonghoon Song

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.31-37

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.031

  Open abstract

• A Study on Surface Characteristics of High Tensile Brass with Molybdenum Flame Spray Treatment

  Dong-Hyun Jung, Hae-Ji Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.38-45

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.038

  Open abstract

• Nondestructive Evaluation for Mechanical Degradation of Ultrasuper-Critical Heat-Resistance Steel by Reversible Permeability

  SeongBin Ahn, JaeJin Kim, DongMin Seo, ChungSeok Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.46-52

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.046

  Open abstract

• Study on Electrical Characteristics of FDM Conductive 3D Printing According to Annealing Conditions

  Sun Kon Lee, Yong Rae Kim, Tae Jung Yoo, Ji Hye Park, Joo Hyung Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.53-60

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.053

  Open abstract

• A Study on Characteristics of Dimensional Accuracy using Planning Number of Machining in Machining Center

  Yong-Mo Yang

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.61-67

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.061

  Open abstract

• Determination of Flow Stress and Cutting Force Prediction of Ti-6Al-4V Material for 3D Printer using S-K Constitutive Equation

  Dae-Gyoun Park, Tae-Ho Kim, Eon-Chan Jeon

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.68-74

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.068

  Open abstract

• Structural Optimization of an LMU Using Approximate Model

  Dong-Seop Han, Si-Hwan Jang, Soon-Hyeong Park, Kwon-Hee Lee

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.75-82

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.075

  Open abstract

• An Experimental Verification on the Development of an Innovative Diamond Wire Saw Cutting Technology

  Jong Hyup Park, Baeksuk Chu

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.83-90

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.083

  Open abstract

• Effects of Temperature on Removal Rate in Cu CMP

  In-Ho Park, Da-Sol Lee, Seon-ho Jeong, Hae-do Jeong

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.91-97

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.091

  Open abstract

• A Study on the Process Optimization of Microcellular Foamed Ceiling Air-Conditioner 4-Way Panel

  Joo-Kwon Kim, Jung-Hee Lee, Jong-Sun Kim, Jun-Han Lee, Jae-Seob Kwak

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.98-104

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.098

  Open abstract

• Characteristics of Burst Pressure and Abrasion Resistance of Concrete Hose with Aramid Fiber Reinforcement and Rubber Composition

  Yong-Hwan Kim, Seung-Hwan Lee, Il-Kyung Sung, Yu-wool Lee, Myungchang Kang

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.105-110

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.105

  Open abstract

• Development of Optical Leveling System using Quarter Photodetector

  Byoung-Chang Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.111-116

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.111

  Open abstract

• A Study on Cooling Characteristics of the LED Lamp Heat Sink for Automobile by Forced Convection

  Ho-Dong Yang, Jae-Young Yoo, Seul-Hyun Park

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.117-123

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.117

  Open abstract

• Approximate Response of a Non-linear Vibration Isolation System Using the Harmonic Balance Method

  Gun-Myung Lee

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.124-129

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.124

  Open abstract

• Heat Generation and Machining Accuracy According to Material for Ultra-Precision Machining

  Gyung-Il Lee, Jae-Yeol Kim, Dong-Gi Lee

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.130-135

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.130

  Open abstract

• A Study on the Measurement Method of Spatial Position Compensation for Virtual Reality and Real Space Synchronization

  Kee-Jin Park, Byoung-Hwak Lee, Nam-Hyuk Kim, Sung-Ho Yoon

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.136-143

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.136

  Open abstract

• Numerical Analysis on the Freezing Process of Internal Water Flow in a L-Shape Pipe

  Chung Ho Lee, Jeong-Se Suh

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.144-150

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.144

  Open abstract

• Development of Subminiature Type 3 Composite Pressure Vessel for Cooling Unit in Electric Appliances

  Sung-Min Cho, Seung-kuk Lee, Jong-sam Moon, Sung-ki Lyu

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.151-157

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.151

  Open abstract

• Development of Hydraulic Compressor for Hydrogen Station

  Sung-Min Cho, Gyeong-gil Roh, Ji-woong Yeom, Seung-kuk lee, Sung-ki Lyu

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.158-163

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.158

  Open abstract

• Development of Type 4 Composite Pressure Vessel by using PET Liner for Self-contained Breathing Apparatus

  Sung-Min Cho, Seung-kuk Lee, Min-sik Cho, Sung-ki Lyu

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.164-169

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.164

  Open abstract

• Modeling Technology on Free-form Surface of a New Military Personal Head using Quick Surface Method

  Yong-Moon Lee, Tae-Son Hwang, Hun-Kim, Hee-Tae Nam, Kee-Hwan Lee, Myungchang Kang

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.170-176

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.170

  Open abstract

• A Numerical Study for Optimum Design of Dust Separator Screen Based on Coanda Effect

  Seong-Min Yun, Yong-Sun Kim, Hee-Jea Shin, Sang-Cheol Ko

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.177-185

  DOI:https://doi.org/10.14775/ksmpe.2018.17.6.177

  Open abstract