Volume.17 No.5 October 2018

• Simulation Analysis of Flexible Track Drilling Machines Based on ADAMS

  Zhong-gang Zhu, Qi Zhang, Jian-Hua Lv, Zhen Qin, Sung-Ki Lyu

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.1-7

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.001

  Open abstract

• Comparison of Durability for PUA Type Resin using Wear and Nano-indentation Test

  Hyun Min Choi, Sin Kwon, Yoon-Gyo Jung, Young Tae Cho

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.8-15

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.008

  Open abstract

• A Study on the Flow Analysis of Ventilation Louver for Polar Ship

  Chung-Seob Yi, Do-Hun Chin

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.16-22

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.016

  Open abstract

• Numerical Analysis on the Thermal and Fluid in Air Conditioning Duct for Marine Offshore

  Chung-Seob Yi, Byung-Ho Lee, Do-Hun Chin

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.23-29

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.023

  Open abstract

• A Study on Efficiency of Tapered Roller Bearing for an Automatic Transmission

  In-Wook Lee, Sung Gil Han, Yoo In Shin, Chul Ki Song

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.30-36

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.030

  Open abstract

• Analysis of Heat Transfer by Various Laser Beam Patterns in Laser Material Process

  Hae-Woon Choi

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.37-44

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.037

  Open abstract

• Smart Roll Forming Based on Real-Time Process Data

  Jae-Hwan Son, Dong-Hyun Cho, Chul-Hong Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.45-51

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.045

  Open abstract

• A Study on the Efficiency of Fuel Cells for Marine Generators

  Jung-Hee Lee, Jae-Seob Kwak, Kwang-Heui Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.52-57

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.052

  Open abstract

• Life Fatigue Prediction of an Accumulator Composed of Bladder and Housing

  Daeyu Kim, Geonhee Lee, Jangwook Hur

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.58-63

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.058

  Open abstract

• Analysis of Mechanical Properties of Polymer Material for Clear Aligner using Uniaxial Tensile Test

  Ji-Young Jeong, Tae-Jin Je, Eun-chae Jeon

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.64-69

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.064

  Open abstract

• Analysis of Machined Surface Morphology According to Changes of Surface Condition in Micro Particle Blasting

  Sung-Yun Choi, Cheol-Ung Hwang, Dae-Gyu Kwon

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.70-75

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.070

  Open abstract

• Analysis of Door Height Difference and Door Flatness Difference of Built-in Side-by-Side Refrigerator Using Cabinet-Door Integrated Model

  Boo-Youn Lee

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.76-83

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.076

  Open abstract

• Numerical Analysis of Cooling Channels for Injection Molding Cycle Time Improvement of Plastic Horn Cover for an Automobile

  Seong-Ryoel Han

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.84-90

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.084

  Open abstract

• The Effect of Dimensions of Micro-post on Oleophobic Property

  Nam-Kyung Kim, Hae-Ji Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.91-96

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.091

  Open abstract

• A Study on Reliability Improvement of BLDC Motor for Combat Vehicle in High Temperature Environment

  Hyo-Jin Yoon, Yoon-Wook Nam, Kyoung-Sik Park

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.97-102

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.097

  Open abstract

• An Experimental Study on the Deburring Characteristics according to rpm Change of Deburring Wheel

  Kyeong-Ho Cheon, Hae-Ji Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.103-110

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.103

  Open abstract

• Investigation of Thermal Fusion Bonding and Separation of PMMA Substrates by using Molecular Dynamics Simulations

  Taeil Yi

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.111-116

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.111

  Open abstract

• Investigation of Temperature-Dependent Microscopic Morphological Variation of PEEK Powder for a 3D Printer using Dissipative Particle and Molecular Dynamics Simulations

  Namwon Kim, Taeil Yi

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.117-122

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.117

  Open abstract

• Designing Mold Feed Systems for Plug Cover Housing with Filling Analysis

  Jong-Cheon Park, Man-Jun Yu

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.123-130

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.123

  Open abstract

• Optimal Design to Improve Launch Velocity of Coilgun Launching System

  Chang Hyung Park, Jin Ho Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.131-136

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.131

  Open abstract

• Predicting Thermo-mechanical Characteristics from the 2nd Phase Fraction of Al-AlN Composites for LED Heat Sinks with FEM

  Juil Yoon

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.137-142

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.137

  Open abstract

• Study of the Mechanical Properties and Orthotropy of ABS Materials Fabricated by FDM Printing

  Juil Yoon

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.143-148

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.143

  Open abstract

• Study on Filter Efficiency and Lifetime Enhancement by using Internal Structures

  Ji-Hun Kim, Sangwoo Yoon, Sung-Ho Kwon, Su-Hwan Sung, Mun-Oh Bae, Joohan Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.149-154

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.149

  Open abstract

• CAPP for 3D Printer with Metallic Wire Supplied from the Front

  Ho-chan Kim, Jae-gu Kim

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.155-160

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.155

  Open abstract

• Development of Robot Vision Control Schemes based on Batch Method for Tracking of Moving Rigid Body Target

  Jae-Myung Kim, Cheol-Woong Choi, Wan-Shik Jang

  Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.161-172

  DOI:https://doi.org/10.14775/ksmpe.2018.17.5.161

  Open abstract