Journal Search Engine
Search Advanced Search Adode Reader(link)
Download PDF Export Citaion korean bibliography PMC previewer
ISSN : 1598-6721(Print)
ISSN : 2288-0771(Online)
The Korean Society of Manufacturing Process Engineers Vol.2 No.2 pp.84-90
 

A Study on the Formability of Magnesium Alloy in Warm Temperature

Kang, Dae-Min,Hwang, Jong-Kwan,El-Morsy, A.M.,Manabe, Ken-Ichn,

Abstract

Magnesium alloys have been paid attention In automotive and industries as lightweight materials, and with these materials it has been attempted at deep drawing process for assessment of formability of sheet metal. For warm deep drawing process with a local heating and cooling technique, both die and blank holder were heated at warm temperature while the punch was kept at room temperature by cooling water. Warm deep-drawing process with considering heat transfer was simulated by finite element method to investigate the improvement of deep-drawability and temperature distribution of Mg alloy sheet. The effect of sham rate sensitivity index on the deformation profile was considered in this work and the simulation results revealed that considering heat transfer is very effective for deep-drawability of Mg alloy. The deformed blank In considering heat transfer was drawn successfully without any localized thinning and the cup height is higher in contrast to results of simulations in considering no heat transfer.

고온상태에서 마그네슘 합금의 디프드로잉 성형성에 관한 연구

강대민,황종관,,,

초록