Journal Search Engine
Search Advanced Search Adode Reader(link)
Download PDF Export Citaion korean bibliography PMC previewer
ISSN : 1598-6721(Print)
ISSN : 2288-0771(Online)
The Korean Society of Manufacturing Process Engineers Vol.5 No.4 pp.46-52

Variation of Mechanical Properties on Polystyrene Elastomer According to Injection Molding Conditions

Han, Seong-Ryeol,Kim, Joon-Hyung,Jeon, Seung-Gyeong,Jeong, Yeong-Deug,


From the past, most of the studies about thermoplastic elastomers(TPEs) have been conducted for theirs compounded materials and morphology. However these studies do not directly affect on injection molding processing. Therefor this study is focus on the variation of mechanical properties on TPEs moldings by increasing injection molding conditions which included injection molding conditions include injection pressure, holding pressure, melt temperature, mold temperature. The used experimental TPEs is a group of styrene(TPS). Injection pressure slightly affected on tensile strength, shrinkage and hardness. Holding pressure only affected on hardness. The melt temperature was the most affective condition on tensile strength.

폴리스틸렌계 엘라스토머의 사출성형조건에 따른 기계적 물성 변화