Journal Search Engine
Search Advanced Search Adode Reader(link)
Download PDF Export Citaion korean bibliography PMC previewer
ISSN : 1598-6721(Print)
ISSN : 2288-0771(Online)
The Korean Society of Manufacturing Process Engineers Vol.13 No.2 pp.49-54

A Study on the Drilling Characteristics for Implant Procedure Drill

Lee, Sang-Min,Chae, Seung-Su,Lee, Jae-Kun,Choi, Hwan,Lee, Jong-Chan,


Skull Melted 3.2YSZ has good physical properties and does not undergo low temperature degradation. Due to these excellent physical and mechanical properties, Skull Melted 3.2YSZ has been studied for use in dental implants. In this study, a ©ª2.2mm Initial Twist Drill was made using Skull Melted 3.2YSZ; the drilling characteristics were compared with those of the traditional SUS420J drill. The experimental results indicate that the Skull Melted 3.2YSZ drill requires similar thrust forces and has a slightly higher temperature.

임플란트 시술용 드릴의 가공 성능 평가에 관한 연구