:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Development of Strain-gauge-type Rotational Tool Dynamometer and Verification of 3-axis Static Load

Dong-Seop Lee, In-Su Kim, Se-Han Lee, Duck-Hyun Wang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.9 pp.72-80

DOI:https://doi.org/10.14775/ksmpe.2019.18.9.072
Open abstract
Cutting Force Characteristics and Tool Deflection When Machining Rectangular Shapes with a Ball End Mill

In Soo Kim, Sang Hyun Kim, Dong Sup Lee, Duck Hyun Wang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.6 pp.26-32

DOI:https://doi.org/10.14775/ksmpe.2019.18.6.026
Open abstract
A Study on the Cutting Forces and Tool Deformation when Flat-ended Pocket Machining

Sung-Yun Choi, Dae-Gyu Kwon, In-Su Park, Duck-Hyun Wang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.2 pp.28-33

DOI:https://doi.org/10.14775/ksmpe.2017.16.2.028
Open abstract
A study on the optimal conditions for machining accuracy when endmill fillet cutting at the corner

Sung-Yun Choi, Dae-Gyu Kwon, In-Su Park, Duck-Hyun Wang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.4 pp.101-108

DOI:https://doi.org/10.14775/ksmpe.2016.15.4.101
Open abstract
Dynamic and Static End-milling Force Analysis According to Workpiece Geometry

Jae-Yong Yang, Moon-Chul Yoon, Byung-Tak Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.11 No.4 pp.13-19

DOI:
Open abstract
The Mechanism and Detection of Tool Fracture using Sensor Fusion in Cutting Force and AE Signals for Small Diameter Ball-end Milling

Wang, Duck-Hyun,Kim, Won-Il,Lim, Jeong-Suk,

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.3 No.3 pp.24-31

DOI:
Open abstract
Detection of Chatter using Wavelet Transform

Oh, Sang-Lok,Chin, Do-Hum,Yoon, Moon-Chul,Ryoo, In-Ill,Ha, Man-Kyung,

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.3 No.2 pp.32-38

DOI:
Open abstract
Fracture Detection of Milling Cutter Using Cutting Force and Acoustic Emission Signals

Maeng, Min-Jae,

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.3 No.1 pp.28-37

DOI:
Open abstract
Wheel Loading Diagnosis and De-noising by Wavelet Transform

Yang J.Y.,Ha M.K.,Kwak J.S.,Park H.M.,Lee S.J.,

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.1 No.1 pp.29-37

DOI:
Open abstract