:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Effects on the Washboarding Phenomenon Based on the Size of the Rotating Body Using a Discrete Element Method

Seoungjun Lee, Junyoung Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.8 pp.25-32

DOI:https://doi.org/10.14775/ksmpe.2021.20.08.0025
Open abstract
Discrete Element Method for Defining the Dynamic Behavior and Abrasion of Gravel in Mixer Trucks during Mixing and Discharging

Seung-Hun Ryu, Ho-Kil Woo

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.12 pp.34-41

DOI:https://doi.org/10.14775/ksmpe.2020.19.12.034
Open abstract
A Numerical Analysis for the Washboarding Phenomenon on the Top Surface of Fine Powders Using the Discrete Element Method

Seoungjun Lee, Junyoung Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.4 pp.93-98

DOI:https://doi.org/10.14775/ksmpe.2020.19.04.093
Open abstract
A Comparison of the Direct Shear Test and Shear Simulation Based on the Discrete Element Method

Sung-Heon Jung, Jeong-Hyun Sohn

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.3 pp.86-91

DOI:https://doi.org/10.14775/ksmpe.2020.19.03.086
Open abstract
Analysis of Particle Packing Process by Contact Model in Discrete Element Method

Jaehee Lyu, Junyoung Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.3 pp.59-65

DOI:https://doi.org/10.14775/ksmpe.2019.18.3.059
Open abstract
Discrete Element Method using the Superposed Rigid-Rod Model for the Dynamic Behavior of Needle-Shaped Powder with a High Aspect Ratio

YoungHo Kim, Junyoung Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.3 pp.22-27

DOI:https://doi.org/10.14775/ksmpe.2018.17.3.022
Open abstract
A New Rigid Rod Model for the Discrete Element Method to Analyze the Dynamic Behavior of Needle-shaped Powder

Seong-Hae An, Junyoung Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.2 pp.149-154

DOI:https://doi.org/10.14775/ksmpe.2017.16.2.0149
Open abstract
Linear Cutting Simulation for Granite using Discrete Element Method

Chul-Woong Jun, Jeong-Hyun Sohn, Jae-Wook Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.4 pp.1-7

DOI:https://doi.org/10.14775/ksmpe.2016.15.4.001
Open abstract
Rodent Experiments for Pedestrian Flow Simulation at Exit with Various Angles

Hyejin Oh, Jaehee Lyu, Junyoung Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.4 pp.30-39

DOI:https://doi.org/10.14775/ksmpe.2016.15.4.030
Open abstract