:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Determination of the Temperature Coefficient of the Constitutive Equation using the Response-Surface Method to Predict the Cutting Force

Byeung-Mun Ku, Tae-Ho Kim, Jung-Su Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.10 pp.9-18

DOI:https://doi.org/10.14775/ksmpe.2021.20.10.009
Open abstract
Effects of Cutting Parameters on Surface Roughness in Planing Using Taguchi Method

Dong-Hyun Seo, Ye-Pil Kwon, Young-Jae Kim, Hwan-Jin Choi, Eun-chae Jeon

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.8 pp.93-98

DOI:https://doi.org/10.14775/ksmpe.2021.20.08.0093
Open abstract
A Study on the Productivity Improvement of Inconel 718 Material Using Cutting Force Control Program

Seung-Heon Lee, Hwang-Jin Son, Young-Tae Cho, Yoon-Gyo Jung

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.6 pp.41-46

DOI:https://doi.org/10.14775/ksmpe.2017.16.6.041
Open abstract
Effects of cutting condition on surface roughness in the spiral up milling of aluminum alloy

Chun, Se-Ho,

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.13 No.4 pp.83-90

DOI:
Open abstract
The Development of Module for 5-axis Drilling of a Closed Type Impeller

Son, Hwang-Jin,Cho, Yoon-Tea,Jung, Yoon-Gyo,

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.13 No.1 pp.1-7

DOI:
Open abstract
Development of CAM Automation Module(E-ICAM) for 5-axis Machining of Impeller : A Study on Configuration of Module

Hyoun-Chul Jung, Jong-Dae Hwang, Yoon-Gyo Jung

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.10 No.4 pp.109-114

DOI:
Open abstract
Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation

Jong-Min Park, Won-Sik Choi, Soon-hong Kwon, Jinhoon Cha

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.8 No.4 pp.48-53

DOI:
Open abstract
Correlation analysis between cutting conditions and cylindricity in MQL turning

Sung-Woo Shin, Young-Kug Hwang, Choon-Man Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.8 No.3 pp.74-81

DOI:
Open abstract
Optimal Cutting Condition of Tool Life in the High Speed Machining by Taguchi Design of Experiments

Lim, Pyo,Yang, Gyun-Eui,

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.5 No.4 pp.59-64

DOI:
Open abstract