:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Study on Improvement of Performance by Optimizing Impeller Shape of a Coolant Pump

Min Hyeong Gil, Gun-Myung Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.5 pp.48-52

DOI:https://doi.org/10.14775/ksmpe.2019.18.5.048
Open abstract
Shape Optimal Design of Anti-vibration Rubber Assembly in Tractor Cabin Using Taguchi Method

Ji-Hwan Seo, Boo-Yoon Lee, Sanghoon Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.4 pp.34-40

DOI:https://doi.org/10.14775/ksmpe.2019.18.4.034
Open abstract
Meta-model Effects on Approximate Multi-objective Design Optimization of Vehicle Suspension Components

Chang Yong Song, Ha-Young Choi, Sung-Kwang Byon

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.3 pp.74-81

DOI:https://doi.org/10.14775/ksmpe.2019.18.3.074
Open abstract
Optimization of Joint Hole Position Design for Composite Beam Clamping

Hee-Keun Cho

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.2 pp.14-21

DOI:https://doi.org/10.14775/ksmpe.2019.18.2.014
Open abstract
Optimization of the Groove Depth of a Sealing-type Abutment for Implant Using a Genetic Algorithm

Hyeon-Yeol Lee, Dae-Sun Hong

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.24-30

DOI:https://doi.org/10.14775/ksmpe.2018.17.6.024
Open abstract
A Study on the Process Optimization of Microcellular Foamed Ceiling Air-Conditioner 4-Way Panel

Joo-Kwon Kim, Jung-Hee Lee, Jong-Sun Kim, Jun-Han Lee, Jae-Seob Kwak

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.98-104

DOI:https://doi.org/10.14775/ksmpe.2018.17.6.098
Open abstract
Designing Mold Feed Systems for Plug Cover Housing with Filling Analysis

Jong-Cheon Park, Man-Jun Yu

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.123-130

DOI:https://doi.org/10.14775/ksmpe.2018.17.5.123
Open abstract
Effect on Drive Point Dynamic Stiffness and Lightweight Chassis Component by using Topology and Topography Optimization

Jeong-hun Park, Seung-tae Jeon, Tae-jin Lee, Jeong-dae Kang, Myung-Chang Kang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.3 pp.141-147

DOI:https://doi.org/10.14775/ksmpe.2018.17.3.141
Open abstract
Optimization of Inner Nitriding Process for Cr-Mo-V Steel of Small Arms Barrel by using Taguchi Experimental Design Method

Hyuk-Rin Kwon, Dong-Eun Kim, Hyung-Dong Son, Jea-Won Shin, Jae-Ha Park, Myung-Chang Kang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.3 pp.148-154

DOI:https://doi.org/10.14775/ksmpe.2018.17.3.148
Open abstract
Application of Open Source, Big Data Platform to Optimal Energy Harvester Design

Eun-seop Yu, Seok-Chan Kim, Hanmin Lee, Duhwan Mun

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.2 pp.1-7

DOI:https://doi.org/10.14775/ksmpe.2018.17.2.001
Open abstract
Scale-up of Flat Panel Photobioreactor considering Hydrodynamics

Gwang-Ho Kim, Dong-Woon Lee, Sang-Hwa Jeong

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.1 pp.48-56

DOI:https://doi.org/10.14775/ksmpe.2018.17.1.048
Open abstract
A Study on the Optimization of the Dimensional Deviation due to the Shortening of the Cycle Time for Rear Cover of Mobile Phone

Joo-Kwon Kim, Jong-Sun Kim, Jun-Han Lee, Jae-Seob Kwak

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.6 pp.117-124

DOI:https://doi.org/10.14775/ksmpe.2017.16.6.117
Open abstract
Prediction of Machining Performance using ANN and Training using ACO

Soo-Cheol Oh

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.6 pp.125-132

DOI:https://doi.org/10.14775/ksmpe.2017.16.6.125
Open abstract
Study on Tooth Micro-geometry Optimization of Rear Gear Set in 2 Speed Planetary Gear Reducer

Min-Hyung Jeon, Lae-Sung Kim, Seung-Yoon Noh, Qin Zhen, Chang Choi, Sung-Ki Lyu

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.5 pp.1-6

DOI:https://doi.org/10.14775/ksmpe.2017.16.5.001
Open abstract
Optimization of the Suspension Design to Reduce the Ride Vibration of 90kW-Class Tractor Cabin

Woo-Jin Chung, Ju-Sun Oh, Yoonna Park, Dae-Cheol Kim, Young-Jun Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.5 pp.91-98

DOI:https://doi.org/10.14775/ksmpe.2017.16.5.091
Open abstract
Design of Railway Vehicle Wheel Profile Suitable for Dual-rail Profile

Sung-Kwang Byon, Dong-Hyeong Lee, Ha-Young Choi

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.3 pp.30-37

DOI:https://doi.org/10.14775/ksmpe.2017.16.3.030
Open abstract
Study to Reduce Process Cycle Time and to Improve Surface Roughness of a Mobile Phone Unibody Case through Cutting Force Optimization

Seung-Yong Lee , Hyun-Jin Choi , Jong-Chan Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.3 pp.119-124

DOI:https://doi.org/10.14775/ksmpe.2017.16.3.119
Open abstract
A Study on Optimal Design for Linear Electromagnetic Generator of Electricity Sensor System using Vibration Energy Harvesting

Seong Jin Cho, Jin Ho Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.2 pp.7-15

DOI:https://doi.org/10.14775/ksmpe.2017.16.2.007
Open abstract
Study on the Load Analysis in Accordance with the Contact Position between a High-Load Long-Pitch Roller Chain and Sprocket

Chang-Uk Kim, Seung–Bin Park, Jung-Il Song

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.1 pp.51-57

DOI:https://doi.org/10.14775/ksmpe.2016.16.1.051
Open abstract
Optimization of Design Variable for Injection Molding Using a Modified Golden Section Search Method

Jong-Cheon Park, Kyung-Mo Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.1 pp.63-69

DOI:https://doi.org/10.14775/ksmpe.2016.16.1.063
Open abstract

1|2|3