:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Dimensional Characteristics of Hydraulic Actuator Curve based on 3D Printing Filament Materials

Myung-Hwi Jung, Jeong-Ri Kong, Hae-Ji Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.1 pp.74-79

DOI:https://doi.org/10.14775/ksmpe.2021.20.01.074
Open abstract
A Study on the Mechanical Properties of Artificial Bone Structure Fabricated Using a 3D Printer

Yeong-Jun Heo, Seong-Dae Choi

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.11 pp.35-41

DOI:https://doi.org/10.14775/ksmpe.2020.19.11.035
Open abstract
Contact Resistance between Flexible Tactile Sensor Fabricated by Direct Write and Copper Alloy Terminals

Jindong Kim, Yonghwan Bae, Haeyong Yun, Inhwan Lee, Hochan Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.10 pp.111-116

DOI:https://doi.org/10.14775/ksmpe.2020.19.10.111
Open abstract
Node Part Development of Vehicle Body with Space Frame Using Design Technology for Additive Manufacturing

Min-Seok Yang, Jin-Seok Jang, Da-Hye Kim, Ji-Hyun Sung, Jeung-Tae Kim, Yeong-Chul Cho, Jae-Wook Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.5 pp.45-52

DOI:https://doi.org/10.14775/ksmpe.2020.19.05.045
Open abstract
Fused Deposition Modeling 3D Printing-based Flexible Bending Sensor

Sun Kon Lee, Young Chan Oh, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.1 pp.63-71

DOI:https://doi.org/10.14775/ksmpe.2020.19.01.063
Open abstract
Manufacturing Experiments using FDM 3D-printed Flexible Resistance Sensors with Heterogeneous Polymer Material Annealing

Sun Kon Lee, Young Chan Oh, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.1 pp.81-88

DOI:https://doi.org/10.14775/ksmpe.2020.19.01.081
Open abstract
Dimensional Characteristics according to Internal Density of Automotive Inner Ring in 3D Printing

Hae-Ji Kim, Nam-Kyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.11 pp.96-102

DOI:https://doi.org/10.14775/ksmpe.2019.18.11.096
Open abstract
3D Printing Characteristics of Automotive Hub using 3D Scanner and Reverse Engineering

Hae-Ji Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.10 pp.104-109

DOI:https://doi.org/10.14775/ksmpe.2019.18.10.104
Open abstract
Optimization of Manufacturing Conditions of Pressure-Sensitive Ink Based on MWCNTs

Sung-Chul Park, In-Hwan Lee, Yong-Hwan Bae, Ho-chan Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.8 pp.1-7

DOI:https://doi.org/10.14775/ksmpe.2019.18.8.001
Open abstract
Investigation of the Internal Stress Relaxation in FDM 3D Printing : vegetable lubricating oil

Sun Kon Lee, Yong Rae Kim, Su Hyun Kim, Sun Ho Kang, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.2 pp.82-90

DOI:https://doi.org/10.14775/ksmpe.2019.18.2.082
Open abstract
Relationship between Mechanical Properties and Porosity of Porous Polymer Sheet Fabricated using Water-soluble Particles

Sae-Rom So, Suk-Hee Park, Sang-Hu Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.16-23

DOI:https://doi.org/10.14775/ksmpe.2018.17.6.016
Open abstract
Study on Electrical Characteristics of FDM Conductive 3D Printing According to Annealing Conditions

Sun Kon Lee, Yong Rae Kim, Tae Jung Yoo, Ji Hye Park, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.53-60

DOI:https://doi.org/10.14775/ksmpe.2018.17.6.053
Open abstract
Study of the Mechanical Properties and Orthotropy of ABS Materials Fabricated by FDM Printing

Juil Yoon

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.143-148

DOI:https://doi.org/10.14775/ksmpe.2018.17.5.143
Open abstract
CAPP for 3D Printer with Metallic Wire Supplied from the Front

Ho-chan Kim, Jae-gu Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.5 pp.155-160

DOI:https://doi.org/10.14775/ksmpe.2018.17.5.155
Open abstract
Infill Print Parameters for Mechanical Properties of 3D Printed PLA Parts

Kyoung-SU Seol, Panxi Zhao, Byoung-Chul Shin, Sung-Uk Zhang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.4 pp.9-16

DOI:https://doi.org/10.14775/ksmpe.2018.17.4.009
Open abstract
Flow Stress Determination of Johnson-Cook Model of Ti-6Al-4V Material using 3D Printing Technique

Dae-Gyoun Park, Tae-Ho Kim, Eon-Chan Jeon

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.4 pp.64-69

DOI:https://doi.org/10.14775/ksmpe.2018.17.4.064
Open abstract
Investigation of the Internal Stress Relaxation in FDM 3D Printing : Annealing Conditions

Sun Kon Lee, Yong Rae Kim, Su Hyun Kim, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.4 pp.130-136

DOI:https://doi.org/10.14775/ksmpe.2018.17.4.130
Open abstract
Fatigue Test of 3D-printed ABS Parts Fabricated by Fused Deposition Modeling

Kyoung-Su Seol, Byoung-Chul Shin, Sung-Uk Zhang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.3 pp.93-101

DOI:https://doi.org/10.14775/ksmpe.2018.17.3.093
Open abstract
Correlation between UV-dose and Shrinkage amounts of Post-curing Process for Precise Fabrication of Dental Model using DLP 3D Printer

Dong-Hun Shin, Young-Min Park, Sang-Hu Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.2 pp.47-53

DOI:https://doi.org/10.14775/ksmpe.2018.17.2.047
Open abstract
Evaluation of Microstructure and Mechanical Properties in 17-4PH Stainless Steels Fabricated by PBF and DED Processes

Jong-Cheon Yoon, Min-Gyu Lee, Chang-Young Choi, Dong-Hyuk Kim, Myeong-Sik Jeong, Yong-Jin Choi, Da-Hye Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.2 pp.83-88

DOI:https://doi.org/10.14775/ksmpe.2018.17.2.083
Open abstract

1|2