:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Fused Deposition Modeling 3D Printing-based Flexible Bending Sensor

Sun Kon Lee, Young Chan Oh, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.1 pp.63-71

DOI:https://doi.org/10.14775/ksmpe.2020.19.01.063
Open abstract
Manufacturing Experiments using FDM 3D-printed Flexible Resistance Sensors with Heterogeneous Polymer Material Annealing

Sun Kon Lee, Young Chan Oh, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.1 pp.81-88

DOI:https://doi.org/10.14775/ksmpe.2020.19.01.081
Open abstract
Optimization of Manufacturing Conditions of Pressure-Sensitive Ink Based on MWCNTs

Sung-Chul Park, In-Hwan Lee, Yong-Hwan Bae, Ho-chan Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.8 pp.1-7

DOI:https://doi.org/10.14775/ksmpe.2019.18.8.001
Open abstract
Investigation of the Internal Stress Relaxation in FDM 3D Printing : vegetable lubricating oil

Sun Kon Lee, Yong Rae Kim, Su Hyun Kim, Sun Ho Kang, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.2 pp.82-90

DOI:https://doi.org/10.14775/ksmpe.2019.18.2.082
Open abstract
Study on Electrical Characteristics of FDM Conductive 3D Printing According to Annealing Conditions

Sun Kon Lee, Yong Rae Kim, Tae Jung Yoo, Ji Hye Park, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.6 pp.53-60

DOI:https://doi.org/10.14775/ksmpe.2018.17.6.053
Open abstract
Investigation of the Internal Stress Relaxation in FDM 3D Printing : Annealing Conditions

Sun Kon Lee, Yong Rae Kim, Su Hyun Kim, Joo Hyung Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.4 pp.130-136

DOI:https://doi.org/10.14775/ksmpe.2018.17.4.130
Open abstract
Correlation between UV-dose and Shrinkage amounts of Post-curing Process for Precise Fabrication of Dental Model using DLP 3D Printer

Dong-Hun Shin, Young-Min Park, Sang-Hu Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.2 pp.47-53

DOI:https://doi.org/10.14775/ksmpe.2018.17.2.047
Open abstract
Evaluation of Microstructure and Mechanical Properties in 17-4PH Stainless Steels Fabricated by PBF and DED Processes

Jong-Cheon Yoon, Min-Gyu Lee, Chang-Young Choi, Dong-Hyuk Kim, Myeong-Sik Jeong, Yong-Jin Choi, Da-Hye Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.2 pp.83-88

DOI:https://doi.org/10.14775/ksmpe.2018.17.2.083
Open abstract
Development of Stereolithography Apparatus by using UV-LED

Yun, Hae-Yong,Ko, Tae-Jo,Kim, Ho-Chan,

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.13 No.2 pp.15-20

DOI:
Open abstract