:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Design of Heavy Weight Door Hinge for Built-in Appliances

Seong-Dae Choi, Yong-Kun Byn, Gi-Man Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.7 pp.41-47

DOI:https://doi.org/10.14775/ksmpe.2021.20.07.041
Open abstract
Dimensional Characteristics of 3D Printing by FDM and DLP Output Methods

Myung-Hwi Jung, Jeong-Ri Kong, Hae-Ji Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.1 pp.66-73

DOI:https://doi.org/10.14775/ksmpe.2021.20.01.066
Open abstract
Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle

Hyeon-Je Kang, Byeong-Ho Kim, Byung-Hyun Kim, Jae-Hyun Seo

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.3 pp.58-65

DOI:https://doi.org/10.14775/ksmpe.2016.15.3.058
Open abstract
Structural Analysis on Door Hinge of Car

Jae-Ung Cho, Moon-Sik Han

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.9 No.2 pp.33-39

DOI:
Open abstract

Copyright © The Korean Society of Manufacturing Process Engineers. All rights reserved.