-
Optimization of Processing Conditions According to Run-out During End-mill Round Machining
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.1 pp.57-65
DOI:https://doi.org/10.14775/ksmpe.2021.20.01.057
Open abstract -
Study on the Selection of End Mill Shape to Improve Tool Life in End Mill Process of Ti-6Al-4V Alloy
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.11 pp.76-82
DOI:https://doi.org/10.14775/ksmpe.2019.18.11.076
Open abstract -
Tool Wear Rate and Accuracy of Patterns in Micro Prismatic End-milling
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.3 pp.1-6
DOI:https://doi.org/10.14775/ksmpe.2018.17.3.001
Open abstract -
A Study on the Optimum Shape of MQL Carbide End-mill for Machining of Aluminum Lithium Alloy
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.12 No.6 pp.159-166
Open abstract -
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.12 No.5 pp.129-134
Open abstract -
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.12 No.4 pp.40-46
Open abstract -
A Study on Characteristics of Cutting by Cutting Conditions in Titanium Machining
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.12 No.1 pp.84-89
Open abstract -
An Analysis of the Cutting Force for Peripheral End-milling Considering Run-out
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.11 No.4 pp.7-12
Open abstract -
Dynamic and Static End-milling Force Analysis According to Workpiece Geometry
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.11 No.4 pp.13-19
Open abstract -
An Analysis on the Tooth Passing Frequency using End-milling Force
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.10 No.4 pp.1-7
Open abstract -
A Study on Surface Roughness of Al alloy 7075 to Cutting depth in High-speed Machining
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.9 No.6 pp.29-35
Open abstract -
Development of End-milling Inspection System Using 450㎸p Tube Voltage
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.8 No.2 pp.10-17
Open abstract -
A Study on the Development of a Step Cutter with Hybrid Process of Drilling and Boring
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.7 No.3 pp.30-35
Open abstract -
Micro End-milling Technology for Micro Pole Structures
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.4 No.3 pp.7-13
Open abstract -
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.3 No.4 pp.37-42
Open abstract -
Application of Design of Experiment Optimum Working Condition in Flat End-Milling
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.2 No.3 pp.20-25
Open abstract -
Topography Analysis in High Speed Working by Flat Endmill
Journal of the Korean Society of Manufacturing Process Engineers :: Vol.1 No.1 pp.79-88
Open abstract