:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Tool Wear Characteristics of Tungsten Carbide Implanted with Plasma Source Nitrogen Ions in High-speed Machining

Sung-Ho Park, Duck Hyun Wang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.21 No.5 pp.34-39

DOI:https://doi.org/10.14775/ksmpe.2022.21.05.034
Open abstract
Micro-pattern Fabrication of Amorphous Alloy by Laser Beam Machining

Haan Kim, Jong Wuk Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.21 No.4 pp.77-83

DOI:https://doi.org/10.14775/ksmpe.2022.21.04.077
Open abstract
Processing Characteristics of Multi Layer Diamond Electrodeposition Tool

Seung-hwan Cha, Dong-ho Yang, Sang-hyeop Lee, Jong-Chan Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.21 No.3 pp.22-28

DOI:https://doi.org/10.14775/ksmpe.2022.21.03.022
Open abstract
Five-axis Machining Characteristics of Titanium Alloy Forging Shape

Hong-Il Jung, Jeong-Ri Kong, Hae-Ji Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.21 No.3 pp.92-99

DOI:https://doi.org/10.14775/ksmpe.2022.21.03.092
Open abstract
Selection of Optimal Processing Conditions for Quartz Using the Taguchi Method

Ho-In Jeong, Seong-Jun Choi, Choon-Man Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.21 No.2 pp.123-129

DOI:https://doi.org/10.14775/ksmpe.2022.21.02.123
Open abstract
A Basic Study on Efficient Acrylic Plate Light Transmission Road Machining

Su-Won Han, Jun-Hee Hong

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.21 No.1 pp.95-101

DOI:https://doi.org/10.14775/ksmpe.2022.21.01.095
Open abstract
Improvement of Mold-Sculptured Surface Quality Based on Tool Shape and Posture

Il-Woo Yun, Jong-Dae Hwang, Dae-Cheol Ko

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.12 pp.100-106

DOI:https://doi.org/10.14775/ksmpe.2021.20.12.100
Open abstract
Evaluation of Formability Dependent on the Location of Injection Gate of Vertical Machining Center ATC Tool Port Using Injection Molding Analysis

Yu-Wool Lee, Chul-Woo Park, Jin-Rok Kim, Hyun-Jin Choi

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.12 pp.129-135

DOI:https://doi.org/10.14775/ksmpe.2021.20.12.129
Open abstract
A Study on Post-Processing and Machine Simulation of AC Type 5-Axis Machine Tool for Machining of Mold Surface

Il-Woo Yun, Jong-Dae Hwang, Dae-Cheol Ko

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.11 pp.30-35

DOI:https://doi.org/10.14775/ksmpe.2021.20.11.030
Open abstract
A Study on the Effect of Macro-geometry and Gear Quality on Gear Transmission Error

Ju-Yeon Lee, Sang-Gon Moon, Seok-Pyo Moon, Su-Chul Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.11 pp.36-42

DOI:https://doi.org/10.14775/ksmpe.2021.20.11.036
Open abstract
Surface-shape Processing Characteristics and Conditions during Trajectory-driven Fine-particle–injection Processing

Hyoung-Tae Lee, Chul-Woong Hwang, Sea-Han Lee, Duck Hyun Wang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.10 pp.19-26

DOI:https://doi.org/10.14775/ksmpe.2021.20.10.019
Open abstract
Experimental Research on the Surface Roughness Characteristics in Machining Center Machining of A5083 Alloy

Jin-Woo Choi

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.9 pp.57-62

DOI:https://doi.org/10.14775/ksmpe.2021.20.09.057
Open abstract
Hexagonal Shape Characteristics according to the Change in Standoff Distance during Fine Particle Blasting

Hyoung-Tae Lee, Sea-Han Lee, Duck Hyun Wang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.9 pp.76-83

DOI:https://doi.org/10.14775/ksmpe.2021.20.09.076
Open abstract
Analysis of Environmental Factors Affecting the Machining Accuracy

Young Bok Kim, Wee Sam Lee, June Park, Yeon Hwang, June Key Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.7 pp.15-24

DOI:https://doi.org/10.14775/ksmpe.2021.20.07.015
Open abstract
A Study on Acoustic Signal Characterization for Al and Steel Machining by Audio Deep Learning

Tae-won Kim, Young Min Lee, Hae-Woon Choi

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.7 pp.72-79

DOI:https://doi.org/10.14775/ksmpe.2021.20.07.072
Open abstract
Shape Optimization for Lightweight of the Metal 3D Printing Based Hybrid Machining Center

Won-Young Jeong, Ho-In Jeong, Choon-Man Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.20 No.2 pp.80-85

DOI:https://doi.org/10.14775/ksmpe.2021.20.02.080
Open abstract
A Study on the 5-Axis Machining for Ball Gear Cam

Hyun-Deog Cho, Hyun-Gu Woo, Yong-Bum Shin

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.12 pp.98-104

DOI:https://doi.org/10.14775/ksmpe.2020.19.12.098
Open abstract
Analysis of Variation of Specific Cutting Resistance in Nanoscale Cutting

Ye-Pil Kwon, Si-Hoon Kim, Eun-chae Jeon

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.11 pp.23-28

DOI:https://doi.org/10.14775/ksmpe.2020.19.11.023
Open abstract
Turning the Machining Characteristics of Feed-through Ceramics

Se-Jin Park, Jun-Tae Ha, Dong-Ho Yang, Jong-Chan Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.10 pp.81-86

DOI:https://doi.org/10.14775/ksmpe.2020.19.10.081
Open abstract
A Study on the Characteristics of Residual Stress in the Manufacturing Process of AISI 1536V and AISI A387

Sung-Kug Hwang, Jeong-Su Moon, Han Joo Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.9 pp.100-106

DOI:https://doi.org/10.14775/ksmpe.2020.19.09.100
Open abstract

1|2|3|4|5|6|7