:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Experimental Study on the Structural Safety of the Corn Harvester Attached to a Tractor

Chang-Seop Shin, Tae-Yeong Yun, Hwon Choi, TaeHan Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.19 No.2 pp.24-29

DOI:https://doi.org/10.14775/ksmpe.2020.19.02.024
Open abstract
Analysis of the PTO Driveline Rattle Noise on an Agricultural Tractor

Da-Vin Ahn, In-Kyung Shin, Hyun-Woo Han, Gwan-Hee Son, Young-Jun Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.6 pp.45-54

DOI:https://doi.org/10.14775/ksmpe.2019.18.6.045
Open abstract
A Structural Analysis of the Complex Implements of an Agricultural Tractor using Reverse Design

Choong-Ho Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.5 pp.82-89

DOI:https://doi.org/10.14775/ksmpe.2019.18.5.082
Open abstract
Experimental Study on the Drawbar Pull and Structural Safety of an Onion Harvester Attached to a Tractor

Chang-Seop Shin, Jun-Hee Kim, Yu-Shin Ha, Tusan Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.4 pp.16-25

DOI:https://doi.org/10.14775/ksmpe.2019.18.4.016
Open abstract
Stress Analysis of Tractor Front-End Loader against Impact Load Using Flexible Multi-Body Dynamic Simulation

Chang-Seop Shin, Beom-Soo Kim, Hyun-Woo Han, Woo-Jin Chung, Seung-Je Cho, Young-Jun Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.18 No.3 pp.26-32

DOI:https://doi.org/10.14775/ksmpe.2019.18.3.026
Open abstract
Design Improvement of Front-End Loader for Tractor to Reduce Stress Concentration and Evaluation of Impact Safety

Boo-Youn Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.3 pp.109-119

DOI:https://doi.org/10.14775/ksmpe.2018.17.3.109
Open abstract
Optimization of the Suspension Design to Reduce the Ride Vibration of 90kW-Class Tractor Cabin

Woo-Jin Chung, Ju-Sun Oh, Yoonna Park, Dae-Cheol Kim, Young-Jun Park

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.5 pp.91-98

DOI:https://doi.org/10.14775/ksmpe.2017.16.5.091
Open abstract
Inspection of Composite Working Implement of Tractor using 3D Scanning and Reverse Design

Choong-Ho Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.3 pp.45-53

DOI:https://doi.org/10.14775/ksmpe.2017.16.3.045
Open abstract
Development of a High Performance Extractor for the Effective Ingredient of Propolis

Young Tae Cho

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.16 No.3 pp.107-112

DOI:https://doi.org/10.14775/ksmpe.2017.16.3.107
Open abstract