:: Journal of the Korean Society of Manufacturing Process Engineers ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Successful Examples of 3D Printing Technology-based Start-up Enterprises

Jin-Hyung Shim, Won Soo Yun, Tae Jo Ko

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.2 pp.104-110

DOI:https://doi.org/10.14775/ksmpe.2016.15.2.104
Open abstract
A Review of the Fabrication of Soft Structures with Three-dimensional Printing Technology

Jinah Jang, Dong-Woo Cho

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.14 No.6 pp.142-148

DOI:https://doi.org/10.14775/ksmpe.2015.14.6.142
Open abstract
Hybrid Technology using 3D Printing and 5-axis Machining for Development of Prototype of the Eccentric Drive System

Jong-Dae Hwang, Jun-Seok Yang, Sung-Hwan Yun, Yoon-Gyo Jung

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.2 pp.38-45

DOI:https://doi.org/10.14775/ksmpe.2016.15.2.038
Open abstract
Manufacturing Process Improvement for Precision Inner Surface Polishing of Anodizing Treated Airplane Reservoir

Woong-Beom Kim, Young-Tae Cho, Yoon-Gyo Jung, Jeong-Dong Choi

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.2 pp.72-77

DOI:https://doi.org/10.14775/ksmpe.2016.15.2.072
Open abstract
Test and Evaluation based on Standard Regulation of USA Federal Automotive Safety of Assistant Driver’s Seat Airbag at Low Risk Deployment Passenger Airbag using Passenger Protection Wrap

Dong-Eun Kim, Jin-Hyeong Kim, Myung-Chang Kang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.1 pp.61-67

DOI:https://doi.org/10.14775/ksmpe.2016.15.1.061
Open abstract
Amount of Spatter in Arc Welding for High-Strength Galvanized Steel According to Shielding Gas Composition

Young-Cheol Jeong, Young-Tae Cho, Yoon-Gyo Jung

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.1 pp.110-115

DOI:https://doi.org/10.14775/ksmpe.2016.15.1.110
Open abstract
Modeling and Motion-control for a Light-weight Delta Robot

Seong-Il Kim, Jun-Ho Hong, Dongwon Shin

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.3 pp.155-162

DOI:https://doi.org/10.14775/ksmpe.2018.17.3.155
Open abstract
A Study on the Effect of Changes in Chevron Rubber Characteristics on the Vibrational Ride Comfort Level of a Subway Vehicle

Nam Cheol Park, Jeong Seo Koo

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.2 pp.57-65

DOI:https://doi.org/10.14775/ksmpe.2016.15.2.057
Open abstract
Study on an Enhanced Manufacturing Process for Mobile Camera Window Glass

Hae Won Ahn, Ki Hoon Shin, Jae Ho Oh, Hak Chul Kim, Soo Kun Kwon, Seong Dae Choi

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.14 No.5 pp.15-21

DOI:https://doi.org/10.14775/ksmpe.2015.14.5.015
Open abstract
Study of Performance Properties and Steam Condensate Capacity by Orifice Diameters of Free Float Steam Trap Valve

In-Kyou Choi, Jung-Ho Kang

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.2 pp.31-37

DOI:https://doi.org/10.14775/ksmpe.2016.15.2.031
Open abstract
Tough High Thermal-Conductivity Tool Steel for Hot Press Forming

Jongwon Kum, Okjo Park, Seokmoo Hong

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.3 pp.130-134

DOI:https://doi.org/10.14775/ksmpe.2016.15.3.130
Open abstract
Improvement of Spray Coating Uniformity using ESD Electrodes

Hyun-Woo Dang, Seong-Wook Yang, Yang-Hoi Doh, Kyung-Hyun Choi

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.2 pp.118-124

DOI:https://doi.org/10.14775/ksmpe.2016.15.2.118
Open abstract
Performance Improvement of an Extended Kalman Filter Using Simplified Indirect Inference Method Fuzzy Logic

Chang-Hyun Chai

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.2 pp.131-138

DOI:https://doi.org/10.14775/ksmpe.2016.15.2.131
Open abstract
Seismic Qualification Analysis of a Vertical-Axis Wind Turbine

Young-Hyu Choi, Min-Gi Hong

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.3 pp.21-27

DOI:https://doi.org/10.14775/ksmpe.2016.15.3.021
Open abstract
Fabrication of 3D-Printed Circuit Device using Direct-Write Technology

Hae Young Yun, Ho Chan Kim, In Hwan Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.2 pp.1-8

DOI:https://doi.org/10.14775/ksmpe.2016.15.2.001
Open abstract
Numerical Analysis of the Kitchen Hood Ventilation System for Marine Environment

Chung-Seob Yi

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.14 No.5 pp.96-101

DOI:https://doi.org/10.14775/ksmpe.2015.14.5.096
Open abstract
Improvement of the Performance of the Supersonic Abrasive Blasting Nozzle

Ji-Young Kwak, Ik-Jun Jeon, Se-Eun Park, Yeol Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.15 No.2 pp.9-15

DOI:https://doi.org/10.14775/ksmpe.2016.15.2.009
Open abstract
Improving Speed of Coil Guns

Chang Hyung Park, Jin Ho Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.17 No.2 pp.118-123

DOI:https://doi.org/10.14775/ksmpe.2018.17.2.118
Open abstract
CAE/CFD Analysis and Design of High-Pressure Drop Control Valve for Offshore Project

Sung Cheol Jang, Tae-Soo Park, Nam-Soo Hur, In-Whan Kim

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.14 No.5 pp.42-49

DOI:https://doi.org/10.14775/ksmpe.2015.14.5.042
Open abstract
Analytical Study on the Structural Strength of an Air Compressor for Main Engine Starting of 22000TEU Class Container Ships

Soon-Kyoung Kim, Jin-Woo Lee

Journal of the Korean Society of Manufacturing Process Engineers :: Vol.14 No.5 pp.60-67

DOI:https://doi.org/10.14775/ksmpe.2015.14.5.060
Open abstract